• <li id="ov0rq"><ruby id="ov0rq"></ruby></li>
       

      010-82597789

      13691313262

      ?專注粉末,粉體,顆粒

                ?----測量與分析儀器解決方案。
      ?
      研發--產銷--售后--實驗室服務--后延服務--租賃服務
      中儀萬成
      ZHONGYIWANCHENG
      您的當前位置:
      FT-106C普通磨料堆積密度測定儀
          發布時間: 2019-07-22 17:15    

      FT-106C普通磨料堆積密度測定儀

      FT-106CCommon abrasive bulk density tester

      一.      參照標準standard

      GB-T3603-83普通磨料堆積密度測定方法要求制作,適用于剛玉及碳化硅8~240號粒度磨料堆積密度的測定

      According to GB-T3603-83, The bulk density measuring method of ordinary abrasive materials. It is suitable for the  bulk density measurement of the grinding materials of Corundum and silicon carbidee which granularity between 8 and 240

      二.參數資料Parameters

      漏斗材質:黃銅或不銹鋼;錐部高度:82毫米;錐部角度:60~63°;

      Funnel material: brass or stainless steel, cone height: 82 mm,

      cone angle: 60~63°.

      漏斗頸內徑:12.7±0.05毫米;漏斗頸長度:12.70.05毫米。

      Funnel neck inner diameter:12.7±0.05 mm, funnel neck length: 12.70.05mm.

      漏斗鎖閉裝置是一個直徑為35毫米的橡膠球。用兩根彈簧固定在漏斗頸的下端。漏斗頸下端至測量筒口的距離為115±2毫米。

      The funnel locking device is a rubber ball with a diameter of 35 mm

      5.測量筒材質:黃銅;內徑:39±0.1毫米; 內深度:83.7±0.1毫米;容積:約100厘米3. Measuring cylinder material: brass, inner diameter: 39±0.1mm, internal depth: 83.7±0.1mm,volume:100 cm3.

      6.刮料板材質:黃銅Scraper material: brass

      7.選購天平:稱重500g,0.1克

      8.配置:架臺:1套 ;漏 斗: 1只;量杯; 黃銅材質(Φ31mm、25ml)1只;;溢料盤不銹鋼1只;毛  刷1只; 說明書;保修卡;合格證。

      Equipment: Stand: 1 sets, funnel: 1pcs, measuring cup: brass (Φ31mm,25ml)1pcs,

      overflow tray stainless steel 1pcs,  brush 1pcs,manual,warranty card, certificate.
      產品中心
      Product center
      色婷婷日韩精品一区二区