• <li id="ov0rq"><ruby id="ov0rq"></ruby></li>
       

      010-82597789

      13691313262

      ?專注粉末,粉體,顆粒

                ?----測量與分析儀器解決方案。
      ?
      研發--產銷--售后--實驗室服務--后延服務--租賃服務
      中儀萬成
      ZHONGYIWANCHENG
      您的當前位置:
      FT-106普通磨料堆積密度測定儀
          發布時間: 2019-07-22 17:16    

      FT-106普通磨料堆積密度測定儀

      FT-106 Common abrasive bulk density tester

      一.      參照標準standard

      ISO9136:1989《粗磨?! 《逊e密度的測定》和行業標準JB/T7984.2-1999《普通磨料  粗磨粒堆積密度的測定》的相關要求;GB/T20316.1-2009堆積密度測定儀要求;適用于檢測制造固結磨具和涂附磨具的粗顆粒普通磨料的堆積密度

      According to the international standard ISO9136:1989 "the determination of coarse grinding grain bulk density” and industry standards JB/T7984.2-1999 the relevant technical requirements of  ordinary abrasive coarse grinding grain of bulk density determination, at the same time meet the requirements of GB/T20316.1-2009 bulk density meter;It is suitable to test the packing density of coarse grain grinding materials, which can be used in the manufacture of consolidation grinding tools and coated abrasive tools.

      二.參數資料Technical Parameters

      1.1漏斗材質:不銹鋼;

       Funnel material: stainless steel.

      1.2漏斗尺寸:高度240mm;頂部直徑160mm;出口直徑:(20±0.5)mm;

      漏斗底部與測量筒上口的距離:(76±1)mm 測量筒尺寸:內徑64mm; 凈高度62mm  測量筒容積:.(200±0.5) cm3  測量誤差:≤±0.02g/cm3

      Funnel dimensions: height 240mm, top diameter 160mm, outlet diameter: (20±0.5)mm, the distance between the bottom of the funnel and the top of the measuring cylinder: (76±1)mm, measuring cylinder dimensions: inner diameter 64mm, net height: 62mm, measuring cylinder volume: (200±0.5) cm3, measurement error:≤±0.02g/cm3.
      2.1測量誤差:≤±0.02g/cm3。Measurement error:≤±0.02g/cm3.
      2.2測量筒容積:200±0.5cm3。Measuring cylinder volume: (200±0.5) cm3.
      2.3外形尺寸:230mm(長)×250mm(寬)×425mm(高)

      Dimensions: 230mm (L) * 250mm (W) * 425mm (H)

      產品中心
      Product center
      色婷婷日韩精品一区二区